6 in. GRV x 2-1/2 in. MNPT x 2-1/2 in. MNPT Straight Manifold - GrooveFit

Download Datasheet

• FPPI Outlet manifolds are manufactured of solid brass and typically installed as a roof outlet connection for fire service professionals.
• Combine with either gate or angle hose valves for flow control.
• Female NPT or Grooved inlet x NPT or NST outlets.

• The outlet manifold is manufactured from solid brass* to increase service life.
• The straight through design will allow flow up to 500 gallons per minute and can function as an inlet or outlet.
• Features a 4" or 6" NPT or Grooved inlet/outlet and two 2-1/2" NPT threaded inlets/outlets to accommodate approved fire protection valves*
• Available in both Straight and 90 Degree Pattern

• Installation of the outlet connection is achieved with readily available job site tools.
• Prior to installation make sure the proper identification sign has been installed on the nipple.
• Coat male threads of nipple liberally with a suitable pipe thread sealant such as Pipefit®.
• Tighten the outlet one full turn past hand tight and in alignment for required use.
• DO NOT OVER TIGHTEN. OVERTIGHTENING MAY CAUSE SEVERE STRETCHING AND POSSIBLE CRACKING OF THE OF THE BODY.
• *Can be used with FPPI gate type or angle type hose valves.

• Material: Brass*B16
• * Contains lead.
• Not for use in water systems intended for human consumption.