1/2 in. Push-On Hose Barb x 1/2 in. Flare 37/45 Female Swivel, 150 PSI Max Pressure Rating 316 Stainless Steel Fitting

View Sizing Technical Specifications Assembly & Installation

• Typical Application: Low Pressure Air, Fuel, Lube, and Oil Lines
• Pressure determined by tube material and hardness.
• Parts have been tested to max 150 PSI.
• Advantages: Easy assembly. No clamps needed!!
• Assembly Instructions
  • 1.) Lubricate insert.
  • 2.) Hold hose at angle as shown & push on and up over first barb.
  • 3.) Continue to push straight on until hose is seated under protective plastic cap. Keep hands back from hose end area so that hose can expand.
• Disassembling Instructions:
  • 1.) Split hose. Do not cut completely through hose. Sealing edge of barb could be damaged.
  • 2.) Bend hose and remove with a quick pull.