1/2 in. x 3/8 in. Male Adapters, Push-On Hose Barb x MIP Connection, NPT Threads, 150 PSI Max Pressure Rating, 316 Stainless Steel Fitting

• Hose ID x NPT Connection Size: 1/2" x 3/8"
• Overall Length (A): 1.86
• Hose Barb Length (B): 1.02
• Hex Size: 0.69

View Sizing Technical Specifications Assembly & Installation

• Typical Application: Low Pressure Air, Fuel, Lube, and Oil Lines
• Pressure determined by tube material and hardness.
• Parts have been tested to max 150 PSI.
• Advantages: Easy assembly. No clamps needed!!
• Assembly Instructions
  • 1- Lubricate insert.
  • 2- Hold hose at angle as shown & push on and up over first barb.
  • 3- Continue to push straight on until hose is seated under protective plastic cap. Keep hands back from hose end area so that hose can expand.
• Disassembling Instructions:
  • 1.) Split hose. Do not cut completely through hose. Sealing edge of barb could be damaged.
  • 2.) Bend hose and remove with a quick pull.