Stainless Steel Ball Valves Specs - One Piece 1000 PSI Valves

Suitable Mediums: Water, Oil and Gas type substances. (WOG)
Seats & Seals: Teflon (PTFE)
Threads: Female NPT (Female National Pipe Thread)
Standard Port: Reduced Bore Ball Valve (ID is one size smaller than the pipe size)
Handle: Blow-Out Proof
Handle Locking Mechanism: handle equiped with locking device (Re-movable)

These are the best priced ball valves due to the fact that the valve body is made out of one piece.
The benefit of this is that there are no joints for leaking to occur making these 1 piece ball valve's durable and reliable.
The down side of the one piece design is that this makes it a standard port ball valve, also called a reduced port.
This means the ID of the pipe drops one size, once the valve is installed in line.
No tooling is needed for installation.

Valve Body: is cast from Stainless Steel 316 (CF8M)
Seals & Seats: are composed of Teflon (PTFE)
Compatability: Compatible on all substances that are suitable for use with both Teflon and Stainless Steel 316
All wetted Parts are 316 Stainless Steel.
The rest of the valve that doesn't touch the transported material is composed of 304 Stainless Steel.

The size of the ball valve required depends on the size of the thread. (1-1/2" Threads use 1-1/2" Ball Valves.)
The body of valve is manufactured out of one piece, this means that a smaller ball is installed into this valve than can be fitted into the 2-Piece or 3-Piece options. Since The 2 & 3 Piece can be opened up to recieve a larger ball.
The draw back is that this leads to a reduced port.
While the advantage is the chance of leaking is reduced, since the body is one piece with no joints that could become leaking points.

Casting: Investment Casting AD2000-WO
Dimension standards: DIN3202/4-M3, din2999/259, ISO228-1,ISO7-1, ASME B1.20.1,BS21
CE Approval: DN32~DN100
Inspection & Testing: En12266-1,API 598
Shell test pressure: 95 bar for DN6~DN50; 60bar for DN65~DN100
Shell Test Pressure: 95 Bar for DN6-DN50; 60 bar for DN65-DN00
Seal Pressure Test: 70 bar for DN6-~DN50; 44bar for DN65~DN100
Low Pressure Test: 6~8 bar
Pressure at max. Temperature：44.5 bar for 1.4308 and pn63,50.2bar for 144.8 adn PN63; 28.2 bar for 1.4308 and PN40,31.8 bar for 1.4408 and PN40
Pressure at min. Temperature: 59.7 bar for 1.4308 and PN63, 61.2 BAR FOR 1.4408 and PN63; 37.9 bar for1.4308 and PN40,38.8 bar for 1.4408 and PN40
Corrosive Allowance: 2mm
Design & Manufacture: According toEN12516-1/-2,PED97/23/EC (CE0036)